%This document describes the model paths for the different process corners
%Whenever you need to simulate your circuit at a different corner, modify the model path to one of the
%paths shown below (notice that only the last part of the path changes and takes one of these values 'nom' or 'fast' or 'slow' or 'fnsp' or 'snfp')

%Typical or Nominal corner
/eci/tech/ECE594A/ncsu-cdk-1.5.1/models/hspice/nom

%Fast-Fast Corner
/eci/tech/ECE594A/ncsu-cdk-1.5.1/models/hspice/fast

% Slow-Slow corner
/eci/tech/ECE594A/ncsu-cdk-1.5.1/models/hspice/slow

%Fast NMOS- Slow PMOS corner
/eci/tech/ECE594A/ncsu-cdk-1.5.1/models/hspice/fnsp

% Slow NMOS- Fast PMOS corner
/eci/tech/ECE594A/ncsu-cdk-1.5.1/models/hspice/snfp